Countertop surface quartz stone rear arc production process

- Nov 13, 2018-

Although the countertop quartz stone is the material of choice, it is also the most difficult to process. Quartz stone is made of quartz sand and resin by vacuum high pressure and high vibration. Although it is an artificial stone product, its hardness has exceeded that of natural stone, and the highest Mohs hardness is 7th only after diamond hardness. Therefore, the technical requirements for the processing of finished products are very strict.

Quartz stone countertops are also composed of front and rear water retaining and countertops. Most of them are directly pasted. In the previous issue, we also talked about the advantages of using front and rear retaining water, and why the rear arc was selected. After the cabinet countertop is selected, the arc process will be charged separately, but many processors are not willing to make it. The production of round low arc is very troublesome and error-prone. How to make a round low arc? Let's take a look together.

Quartz stone making round low arc is very difficult. Once the mistake is irreparable, the common problems of round and low arc are color loss and glue line. For the production of round low arc, firstly, a strip of about 3 cm should be bonded first. It should be cut before opening. Then, after the paste is sealed, use F clip or A clip to fix it. After it is completely fixed, use the touch head to polish it. Yes, it can also be polished manually, but manual grinding is time consuming.