How to make quartz stone without seams?
Quartz stone plate is listed in the national green environmental protection decorative stone because of its antibacterial, high temperature resistance, wear resistance, leakage resistance, non-toxicity, no radiation and other excellent performance. It is recognized by more people and used in the cabinet countertop. However, in the decoration, it can't avoid two pieces of splicing or even multiple pieces of splicing. Because the hardness of quartz stone plate is up to 7 grades of Mohs hardness, after splicing, in order to make the whole seemingly integrated, it is a test of the technology of quartz stone manufacturers and processing masters. Seamless splicing is a major technological breakthrough in the pursuit of perfection.
For the quartz stone processing industry, the hardness of the plate is second only to the hardness of the diamond, the nearly raw material ratio, and the technical limitations. The quartz stone itself is too high in hardness, and the particles inside will collapse, so when the material is opened The edges are rough and there will be gaps when splicing naturally. Seamless stitching is more difficult. Even if the quartz stone can be seamlessly spliced, it can not be processed after polishing and polishing. There is still a patchwork glue line, which has nothing to do with the price of quartz stone. It is not expensive. .
At present, the seamless splicing of quartz stone is the first requirement for processing equipment. At present, there is a CNC waterjet cutting machine in the Chinese market, which has been used by large-scale countertop processors. After the completion, the original color resin glue is used for pasting. Do not use other glues indiscriminately (can be seamlessly spliced with glue is inseparable). Before affixing, the color should be matched with the plate to avoid chromatic aberration. Use paper tape to paste the edges of the two pairs of interfaces to prevent the glue from coming into contact with the surface of the plate. After the completion, apply the glue evenly to the interface and fix it with the F clamp for about 20 minutes (the hydraulic suction cup booster can be used if possible). After the completion, the seam is polished and polished using a water mill.