Quartz stone countertop installation quality small tricks
The use of quartz stone on the countertop is more popular! Therefore, Xiaobian specially organizes a small trick to ensure the quality of the countertop installation!
1. Quartz stone plane stitching
▼When quartz stone plane splicing, pay attention to the physical properties of quartz stone to avoid the consequences of joint cracking caused by thermal expansion and contraction or stress concentration;
▼ When selecting the connection position, the force of the plate must be fully considered to avoid the connection at the corner or the furnace mouth.
2. Quartz stone countertop corner
▼ In the corner of the quartz stone countertop, be careful not to cause cracking at the corner of the countertop;
▼ Therefore, when machining quartz stone countertops, the arc angle should be maintained at all corners with a radius of 2.5 cm or more.
3. When determining the quartz stone hole position
▼The opening position of the table top needs to be greater than or equal to 8 cm from the edge of the table to prevent cracking of the face of the table;
▼When opening the stove top, first use the cutting machine or jig saw to open the hole, then use the boring machine or hand grinder to polish the trimming to achieve a smooth effect. The corner radius of the four corners is basically uniform, because the jig saw and the cutting machine are opened. ;
▼ If the periphery of the cut hole is sawtoothed to have cracks remaining, it is easy to cause cracking at the opening.
4. Quartz stone countertop corner
▼The corners of the quartz stone countertop opening should be rounded with a radius of 2.5 cm or more. The four corners must be consolidated with the same plate.
▼ There must be a certain space between the cooktop and the countertop. The space distance is 0.4-0.6 cm. Heat-insulating cloth and tin-platinum paper are added around the opening for heat insulation protection.