The quality of quartz stone plate can be analyzed from the source

- Dec 25, 2018-

Quartz stone is no stranger to people who have renovated their houses. Some people even know some ways to identify quartz stones! Often there are many quality issues that can occur after a period of use. Applying for after-sales is also more troublesome, and some will appear to be squabbling with each other. The following is a small series for everyone to analyze the quality of quartz stone from the source!

Quartz stone plate is made of more than 90% quartz sand and 7% resin and other additives, and then heated by vacuum, high pressure, kiln, and artificially produced by quartz stone manufacturers. That is to say, the main material of quartz stone is quartz sand, and the content below 90% is unqualified. The quality of quartz sand also directly affects the quality of the board.

How to distinguish the quality of quartz sand? The preferred quartz slate has no pores on the surface, and the thickness is about 15 mm or more. If the thickness is not up to standard, the folding resistance will be affected. The hardness of quartz sand reaches 7, and it can be seen that the quartz sand is sharpened with a knife or a sharp metal object. If the scratch is left, the quartz sand is unqualified. Regarding the collapse of the upper and lower edges of the cutting surface, it is also unqualified quartz sand. The smaller the splicing gap of the quartz sand, the better the quality. The price of quartz sand is also ranging from 800 yuan to 2,500 yuan per ton per ton, which is also the main factor directly affecting the price of quartz stone.

Therefore, low-priced plates will certainly not be high in raw material procurement. Even if you have the best production equipment, you will not produce good quality materials by using inferior raw materials. Finally, Xiaobian reminds everyone that the high-priced product quality is not necessarily the best, but the low price will not buy good. The so-called value for money!